国产网红无码精品视频,国产高清在线精品一区不卡,久久精品国产亚洲AV日韩,日本熟妇xxxx乱

自從依緣推出現貨工作服以來，許多客戶都會擔心，依緣工作服的質量過不過關，價格會不不太貴，買到的衣服不劃算等問題。在這里，我可以明確的告訴大家，依緣是一家有著十五年工作服生產經驗的廠家，不管是線上還是線下，我們都是有質量保障的。和我們合作過的客戶有上千多家，不僅是依緣的功勞，更是因為客戶相信我們，愿意在我們這里訂衣服。今天依緣小編跟大家分享一下驗收工作服注意的幾個點！
Since the introduction of the spot since the edge of the work clothes, many customers will worry about, according to the edge of the quality of work clothes can not pass, the price will not be too expensive, the clothes are not worth buying and so on. Here, I can definitely tell you, according to fate, is a fifteen year work experience in the production of clothing manufacturers, whether online or offline, we are quality assurance. We have worked with more than 1000 customers, not only in accordance with the merits of the credit, but also because customers believe that we are willing to order clothes here. Today, according to the small Bian Bian, share with you a few points to note the acceptance of work clothes!
1、做工看走線
1, work to see the line
濟南工作服定做http://www.bj-online.cn/線路主要是看衣服的車線是否直?是否勻稱?針距是稀還是密?一般針距密的比較好點，在開始的時候有沒有打“倒回針”，拼接處有沒對齊。倒回針：在一件衣服開始做一般要來回走幾針，這樣衣服就不容易開口，還有車一個部位結束的時候也要打倒回針。都是防止他一拉就暴口一般梭織的比較明顯，比如一條梭織的裙子，你可以看他接口處有沒多走幾針，看側縫也可以看衣服都看一些比較偏的地方，一般人不注意查看到的地方，“領子““袖子、袖口腋下等”。
The line is mainly to see whether the straight line car clothes? Whether symmetry? Stitch is thin or dense? Generally stitch density is better, in the beginning there is no "back needle", there is no splicing alignment. Back stitching: in a dress to do to go back and forth a few needles, this dress is not easy to open, and when a car parts end to back stitch. It is to prevent violence in general, he pulled the loom more obvious, such as a woven dress, you can see him at the interface have to go a few needles, see side seam can also see the clothes are some of the more places, people do not pay attention to the local view, "", "collar sleeves the cuffs of armpit etc.".
2、線頭干凈

2, thread clean
一般品牌的衣服。他們有尾部，有專門的人剪線頭，一般的價格便宜的衣服一般沒有。還有一件衣服如果要求質量好的話，好線頭不超過1cm。
General brand clothes. They have the tail, there are special people cut thread, the general cheap clothes generally not. There is also a piece of clothing, if the quality is good, it is best to thread less than 1cm.
3、規格
3, specifications
首先講規格，也就是大家所了解的，衣服的尺碼一定要正，不要標的是M，實際是L。出現亂碼或者錯嗎的現象。
First of all, specifications, that is what you know, the size of the clothes must be positive, not subject to M, the actual L. Garbled or wrong?.
4、車線是否整齊
4 、 is the bus line tidy?
這個拉線的松和緊是在不同的部位有不同的要求，比如是肩部，人體經常活動的部位，松一點比較好，在衣服的下面，就緊一點比較好，好一件衣服均勻好、領口、領口針腳、腋下車線、接口是否有倒回針。
This cable is loose and tight have different requirements in different parts, such as shoulder, the body is often part of the activities, relax a little better, at the bottom of the tight clothes, a little better, the best clothes, best uniform collar, collar pin, underarm car line, whether there is interface back stitching.
5、板型
5, plate type
左右對稱不，還有就是切片整齊不。
Symmetrical, no, and there are slices, not neat.
6、規范包裝
6, standardized packaging
看一件衣服，首先平鋪下去，看一下會不會有色差，時準除外，還有就是衣服上下是否均勻，然后檢查有沒有小洞等等。
Look at a piece of clothing, first tile down to see if there will be chromatic aberration, when accurate except, and there is whether the clothes up and down uniform, and then check whether there are holes, and so on.
以上就是依緣小編給大家講解的內容，相信大家都有所了解了吧。希望企業在驗收工作服的同時，能夠參考以上的幾個方面哦?。?！
The above is in accordance with the small margin for everyone to explain the content, I believe we all know something about it. Hope that enterprises in the acceptance of work clothes at the same time, can refer to the above aspects!!!