国产网红无码精品视频,国产高清在线精品一区不卡,久久精品国产亚洲AV日韩,日本熟妇xxxx乱

工作服，不少大型的公司或工廠都會有。因為它代表著一個公司的企業文化，它有著宣傳與提醒意義，而且在一些特殊行業，工作服有著防護作用。但是每個公司的采購人員卻不一定對工作服的驗收標準有所了解，因此也不會制定相關的要求。
Work clothes, many large companies or factories will have. Because it represents a company's corporate culture, it has publicity and reminder of significance, and in some special industries, work clothes have protective effect. However, each company's purchasing personnel do not necessarily understand the acceptance criteria of the work clothes, so they will not make relevant requirements.
因為工作服屬于大批量的訂購，如果出現問題，損失將會很大，所以各個公司廠家如果不掌握其中的驗收標準，一旦遇上了不合格的工作服，就會出現巨大損失，耽誤自身工作。為了讓大家能夠更深入地了解這方面的知識，今天妙衫工作服小編為大家講述如何制定工作服定做驗收標準。
Because the work clothes belong to a large number of orders, if there is a problem, the loss will be great, so each company if you don't grasp the acceptance standard, once met the unqualified work clothes, will appear huge losses, delay their work. In order to let you have a deeper understanding of this knowledge, today's wonderful work clothes Xiaobian tell you how to make custom acceptance standards for overalls.
1、做工看走線
1, work to see the line
線路主要是看衣服的車線是否直，是否勻稱，針距是稀還是密，一般針距密的比較好點，在開始的時候有沒有打“倒回針”，拼接處有沒對齊。
The line is mainly to see the clothes car line is straight or not, whether the symmetry, the needle distance is thin or dense, dense needle from the general good, in the beginning there is no "back needle", there is no splicing alignment.
倒回針：在一件衣服開始做一般要來回走幾針，這樣衣服就不容易開口，還有車一個部位結束的時候也要打倒回針。
Back stitching: in a dress to do to go back and forth a few needles, this dress is not easy to open, and when a car parts end to back stitch.
都是防止他一拉就暴口一般梭織的比較明顯，比如一條梭織的裙子，你可以看他接口處有沒多走幾針，看側縫也可以看衣服都看一些比較偏的地方，一般人不注意查看到的地方，“領子““袖子、袖口腋下等”。
It is to prevent violence in general, he pulled the loom more obvious, such as a woven dress, you can see him at the interface have to go a few needles, see side seam can also see the clothes are some of the more places, people do not pay attention to the local view, "", "collar sleeves the cuffs of armpit etc.".
2、線頭干凈
2. Clean thread

一般品牌的衣服。他們有尾部，有專門的人剪線頭，一般的價格便宜的衣服一般沒有。還有一件衣服如果要求質量好的話，好線頭不超過1cm。
General brand clothes. They have the tail, there are special people cut thread, the general cheap clothes are generally not. There is also a piece of clothing, if the quality is good, the best thread head is not more than 1cm.
3、規格
3, specifications
首先講規格，也就是大家所了解的，衣服的尺碼一定要正，不要標的是M，實際是L。出現亂碼或者錯嗎的現象。
First of all, specifications, that is, you know, the size of the clothes must be positive, not the target is M, the actual L. Garbled or wrong?.
4、車線是否整齊
4, the car line is neat
這個拉線的松和緊是在不同的部位有不同的要求，比如是肩部，人體經常活動的部位，松一點比較好，在衣服的下面，就緊一點比較好，好一件衣服均勻好、領口、領口針腳、腋下車線、接口是否有倒回針。
This cable is loose and tight have different requirements in different parts, such as shoulder, the body is often part of the activities, relax a little better, at the bottom of the tight clothes, a little better, the best clothes, best uniform collar, collar pin, underarm car line, whether there is interface back stitching.
5、板型
5, plate type
左右對稱不，還有就是切片整齊不。
Right and left symmetry, no, and the slices are neat.
6、規范包裝
6, standardized packaging
看一件衣服，首先平鋪下去，看一下會不會有色差，時準除外，還有就是衣服上下是否均勻，然后檢查有沒有小洞等等。
Look at a piece of clothing, first tile down, see if there will be color difference, when the exception, and there is whether the clothes up and down uniform, and then check whether there are holes and so on.

以上文章來源于濟南工作服價格http://www.bj-online.cn/